Test & Measurement

RF CAPTURE & PLAYBACK SYSTEM Covering frequency from
100KHz to 2.7GHz, Max. 56MHz Real time Bandwidth recording
capture and playback

The RF Down-converter can receive 0.1MHz - 2.7GHz RF signal and downconverts to 75MHz IF. Capture worldwide Broadcasting standards of DTV (FM, AM, ATSC, DVB-T/H, DVB-T2/S2, DVB-C, DMB, CMMB, DTMB, ISDB-T/B, OpenCable, and ATSC-M/H), Radio Broadcasting ATV (NTSC, PAL), RDS, TMC, LTE, Wifi. Weiver is equipped with a GPS module for accurate locative information to evaluate the strength of the RF signal. The GPS information is stored in the NMEA protocol and the GPRMC information is stored in a second log file. An active Antenna GPS is used. Weiver via input port enables the incoming reference signal to be synchronized at 10MHz frequency.

AM radio to Satellite Broadcasting, and GPS: 100 KHz to 2.7 GHz, Max 56 MHz Real time Bandwidth recording capture and playback

Adjustable Bandwidth by 1 Hz step: An unique, Lumantek's patented technology embedded testing equipment with freely adjustable Bandwidth capability by 1 Hz step.

3D spectrum Mask: The world's first 3D Spectrum Analyzer, user may observe long tail sequence of a spectrum at any angles via mouse.

7KG Weight Portable 70W Low Power Consumption: WEIVER 2.0 is designed for lightness and portability, operable
with vehicle cigar power without complex electrical add-ons.

Fit into Diversity Test - 4CH Diversity test: Up to 4 WEIVER devices can be Synchronized by an external H/W switch, the 'WEIVER Syncer'. Synchronized WEIVER devices perform a simultaneous RF Capture and Playback delays in nanoseconds.

Signal Tracer with Google Map: The 'Signal Tracer' based on API of the Google map traces information on RF recorded area, RF power for each location, and vehicle speed.

RF Black-Box: User may able to define a RF event parameter, record and playback before and after the
occurrence of such event at a certain time frame, including the full sequence

Bias-Tee Option: Bias-Tee is a T-shaped component attached to the signal cable to supply power to the antennas.
Amplifier (LNA, TR, FET and etc) circuits are configured in close proximity to the antennas to improve receive sensitivity, and a separate DC power supply (DC) is required to activate these active elements.

Ordering Information

Designation	Quote Code

Base Unit
RF recorder and playback, 24M BW, 2TB SSD, 100KHz~1GHz	LMTW2-MFU2G
RF recorder and playback, 24M BW, 2TB SSD, 100KHz~2.7GHz	LMTW2-MFU4G
Option for Frequency Extensions
Frequency upgrade, 1GHz~2.7GHz	LMTW2-FU
Option for Bandwidth Extensions
48M bandwidth extension (* LMTW2-BWU2 may apply to LMTW2-MFU2 ( also MFU2G )and LMTW2-MFU4 ( also MFU4G )	LMTW2-BWU2
56M bandwidth extension (* LMTW2-BWU3 may apply to LMTW2-BWU2)	LMTW2-BWU3
Adjustible Bandwidth	LMTW-BWAC
Option for AWGN
AWGN generation	LMTW-AWGN
Option for Library
HD radio Vector signal generation & Ibiquity HD radio Vector Library	LMTW2-LBHD
Options for External Memory packs
2TB (GigaByte) SSD Memory Pack, up to 300 Mbyte/s for the WEIVER	LMTW-EMPU2
Options for Drive test
The WEIVER Syncer (external trigger for multiple units)	LMTW2-EX
BIAS-TEE	LMTW2-BIAS
Additional cables for the test
Accessories
Power Supply Module, 100-240V
Auto DC power regulated adpator (Car Cigar jack)
GPS Module, external antenna
The WEIVER Tracer (Graphical Display of GPS Position and Route data)
I/Q File converter

Service options	Quote Code

Calibration	LMTKWEC
Extended Warranty with calibration coverage, one year	LMTKWEC1W
Extended Warranty with calibration coverage, two year	LMTKWEC2W
Extended Warranty with calibration coverage, three year	LMTKWEC3W
Extended Warranty with calibration coverage, four year	LMTKWEC4W

※ Important Notice: This price table, including all attachments, may contain highly confidential, sensitive, legally privileged, as we have signed on NDA. Any review, retransmission, dissemination or other use of this information by persons or entities other than the intended recipient is prohibited.

* LUMANTEK maintains a price table of product improvement and reserve the right to modify the specifications without notice

Capture Mode

Frequency

Frequency band	[HF (High Frequency) / HF (High Frequency)_Low Noise] 48MHz to 2.7GHz [LF (Low Frequency)] 0.1MHz to 56MHz
Real-time bandwidth	56 MHz max. (Arbitrary Variable BW, 1Hz step)
Frequency resolution	1Hz step
RBW (Resolution bandwidth)	3 KHz, 5 KHz, 10 KHz, 20 KHz
Warm-up time	30 minutes (typ.)
Freq. Stability vs. Temp.	±20 ppb max.
Aging (PER Day)	±1 ppb max.
Aging (PER year)	±50 ppb max.

Spectral Purity

Phase Noise@1 KHz offset	HF	≤ -95 dBc/Hz (1 GHz) ≤ -90 dBc/Hz (2.7 GHz)
Phase Noise@1 KHz offset	LF	≤ -100 dBc/Hz (30 MHz)
Phase Noise@10 KHz offset	HF	≤ -100 dBc/Hz (1 GHz) ≤ -95 dBc/Hz (2.7 GHz)
Phase Noise@10 KHz offset	LF	≤ -105 dBc/Hz (30 MHz)

Noise Figure

Noise Figure(1GHz)	HF	< 7 dB (Gain : 45 dB)
	HF_Low Noise	< 3 dB (Gain 45 dB)
	LF	< 7 dB (Gain 35 dB)

Amplitude

Input Dynamic Range(CW tone)	HF	+10 ~ -135 dBm
	HF_Low Noise	-30 ~ -139 dBm
	LF	+10 ~ -120 dBm
	Input level Resolution	0.1dB
	Input Level Accuracy	±1 dB max.
Gain Range	HF	-15 ~ +50 dB (1 dB step)
	HF_Low Noise	+25 ~ +50 dB (1 dB step)
	LF	-20 ~ +35 dB (1 dB step)

IF band

ADC Resolution	16-Bit
Sampling rate	140 MS/s
IF Frequency	150 MHz

Storage

Storage (Default)	2 TB SSD
Storage time ( BW 8 MHz )	720 minutes
Storage time ( BW 24 MHz )	240 minutes
Storage time ( BW 48 MHz )	120 minutes

Calibration

1 year

Environment

Operating temperature	0 to +50℃
Relative humidity	90%
Storage temperature	-20 to +70℃

RF input port

RF input port	HF	50ohm, N type female, DC-coupled
	HF_Low Noise	50ohm, N type female, DC-coupled
	LF	50ohm, BNC type female, DC-coupled
Max. DC input	±25 VDC max.

Play Mode

Frequency

Frequency band	0.1 to 2700 MHz
Real time bandwidth	56MHz max. (Arbitrary Variable BW, 1Hz step)
Frequency resolution	1Hz step
Warm-up time	30 minutes (typ.)
Freq. Stability vs. Temp.	±20 ppb max.
Daily Aging	±1 ppb max.
Aging (PER year)	±50 ppb max.

Spectral Purity

Phase Noise@1 KHz offset	≤-100 dBc/Hz (30 MHz) ≤ -95 dBc/Hz (1 GHz)
Phase Noise@1 KHz offset	≤ -90 dBc/Hz (2.7 GHz)
Phase Noise@10 KHz offset	≤ -105 dBc/Hz (30 MHz) ≤ -100 dBc/Hz (1 GHz)
Phase Noise@10 KHz offset	≤ -95 dBc/Hz (2.7 GHz)

Spurious Responses

2nd Harmonic	≤ -50dBc
3rd Harmonic	≤ -60dBc
other	≤ -60dBc

RF Output Characteristics

Gain range	-30 ~ +30dB (Input Level Basis)
Amplitude resolution	0.1dB step (Min.)
Amplitude accuracy	±1dB
Power	0dBm max.(48 to 2700 MHz) / +10dBm max.(0.1 to 48 MHz)

RF Output

RF output port	50ohm, N type female, DC-coupled
Max. DC input	±25 VDC max.
Max. reverse RF power	1 W (Max.)

Environment

Operating temperature	0 to +50 ℃
Relative humidity	90%
Storage temperature	-20 to +70 ℃

Physical Features

Dimensions	406mm(W) x 305mm(H) x 100mm(D)
Weight	7 Kg
Power Consumption	70 W

ez-CGER Tutorial-LIVE CG Switcher

All Products Line

Download

Customer

Lumantek Terms of Use: This Site is owned and operated by Lumantek Co., Ltd to provide information about, among other things, our corporate affairs, products, services, partners and also contact details. The terms refer to anyone accessing, viewing, browsing, visiting or using this Site. E-mail to us : [email protected]

Test & Measurement

Broadcasting

Digital Media

Support

Company

Ordering Information